德国BUEKERT2位2通通用电磁阀,宝德电磁阀应用
上海乾拓贸易有限公司
企业QQ：
电话；021-69001039
手机；17321017802（微信）
邮箱；17321017802@163.com
地址：上海市嘉定区江桥嘉涌路99弄6号713室
Measured at valve outlet at 6 bar and +20 oC. Pressure relief 0 90 % Pressure relief 100 to 10 %
Flow rate: Kv value water [m3/h] Measured at +20 oC, 1 bar pressure at valve inlet and free outlet.
 Pressure values [bar] Measured as overpressure to the atmospheric pressure
阀门特别适合流量很小的、液态或气态的侵蚀性介质
紧凑型设计
低电功率消耗
开关时间短
一种直动? Direct acting and separated medium ? Integrated reduction of power
Type 117 is a normally-closed direct-acting plunger-type solenoid valve with PTFE-coated diaphragm.
The diaphragm isolates the ? uid from the solenoid system. When deenergized (in circuit function A)
the valve is closed by spring action. When energized, the solenoid armature is drawn in 2/2-Way,
G 1/8, UNF 1/4-28 Fluid Control Systems against a spring to open the valve.
The solenoid epoxy encapsulation ef? ciently dissipates the heat generated by the coil.
Compact design
? Low electrical power consumption
? Short response times
带有隔膜的升降式衔铁阀
适合侵蚀性介质
Technical data Body material ETFE (TEFZEL) Seal material PTFE with EPDM - PTFE with FKM Media PTFE/EPDM:
alkalis, acids to medium concentration, washing- and bleaching lyes PTFE/FKM: oxydizing acids and substances,
 salt solutions, oils and waste gases Medium temperature  -10 ... +70 °C Max. ambient temperature max.
+55 °C Max. viscosity 21 mm2/s Response times opening closing approx. 20 ms approx.
20 ms Installation as required, but preferably with solenoid system upright Operating voltages 12 V DC, 12 V DC battery,
 24 V DC, 24 V UC, 220-230 V UC Voltage tolerance
? Hermetically sealing isolating diaphragm
? Non-metallic valve internals
直动式电磁阀。根据不同的应用，可以选择各种密封材质。
由于在执行机构和阀体之间采用了隔离膜片，所以该阀可用于控制腐蚀性介质，如酸液和碱液等。
阀体材质为 PVC 或 PVDF。电磁线圈采用耐化学腐蚀的环氧树脂封装。
式升降式衔铁电磁阀，带有相应的塑料外壳和一个具有 PTFE 涂层的隔膜。
? With service friendly manual override ? Normally closed (NC) and normally open function
? KTW and W270 certi? ed for drinking water
Response times [ms] Opening Closing
± 10 % Power consumption 4 W Duty cycle 100 % continuously rated Cycling rate up to 300 c.p.m.
 Protection class with cable plug IP 65 Electr. connection Delivery standard:
 Cable plug DIN 43 650 Form B, 0-250 V. Flying leads 300 mm lenght
此设备可无需电流借助弹簧力关闭。
接通时，磁芯受到吸引，由此克服弹簧力。
所有 DC 式都带“kick and drop”电子线路，用以降低功耗。
可选的电气反馈功能能够可靠地检测开关位置。
与 DIN EN 17301-803 A 型电缆插头配套，该阀的安全防护等级为 IP65。
直动式介质隔离电磁阀，通径 DN 25
防震线圈
DC 式节能节电
采用电气位置反馈，提*安全性
手动开关结构坚固、使用方便
Body material Brass Seal material  EPDM Medium
 Neutral liquids e.g drinking water or neutral gases e.g compressed air Medium temperature -30…+ 80 °C
Ambient temperature -30…+70 oC Viscosity 100…21 mm2/s Operating voltages 24 V UC1 (36 V UC on request)
 110 V UC 230 V UC Voltage tolerance ±30 % Cycling rate Max. 6/min with UC Duty cycle ED 100 % Electrical
connection Cable plug (supplied as standard) Protection class IP65 with cable plug Coil insulation class H
 Installation As required, preferably with actuator upright Max. system pressure in ? ow direction 8 bar (switching pressure max. 3 bar)

德国BUEKERT2位2通通用电磁阀,宝德电磁阀应用