**供应宝得直动式二位二通升降式衔铁阀
上海乾拓贸易有限公司
企业QQ：
电话；021-69001039
手机；17321017802（微信）
邮箱；17321017802@163.com
地址：上海市嘉定区江桥嘉涌路99弄6号713室
(supplied as standard) Protection class IP 65 with cable plug Weight [kg] 0.6 (brass version)
Installation As required, preferably with actuator upright
Power consumption Inrush Hold (hot coil) 1) AC [VA] AC [VA/W] DC [W] 35-40 16/10 approx.12 (13)
Response times Ori? ce [mm] Opening [ms] Closing [ms] AC DC AC DC 1.0-6.0 10-20 20-80 20-30 20-30
1) value in brackets at coil temperature 20 oC
直动式、介质隔离的柱塞电磁阀。线圈和阀体之间通过不锈钢波纹管隔热和密封隔离，
Type 1078 Timer unit
Type 2511 ASI cable plug
焊接金属波纹管系统 (316Ti)
*质量 PTFE 阀座密封
介质温度 -200 °C …+180 °C
节能的 "Kick and Drop“ 电子装置
2/2-way Solenoid Valve for low and high temperatures
The direct-acting valve Type 2610 is delivered with circuit function normally closed.
 The thermal isolation of the coil and housing by means of stainless steel bellows allows the extreme medium temperature.
 In this way condensation or an unacceptable heating up of the coil is avoided. The supplied cable head contains a "kick and drop"
 electronic that supports the opening phase and afterwards reduction of the opening holding power.
? For gases and fluids
Circuit function A
2/2-way valve, normally closed by spring force
Technical data Ori? ce DN 1.0 - 6.0 mm Body material Brass with stainless steel seat 1.4305 or stainless steel body
1.4581 Coil material Epoxy Coil insulation class H Seal material FKM, PTFE (others on request) Media FKM
Hot air, hot oils, oils with additives, per-solutions Water,
使该阀适用于极*的介质温度和腐蚀性介质。电磁线圈采用耐化学腐蚀的环氧树脂封装。
因此，该阀尤其适用于苛刻的介质。标准供货的电缆插头带“kick and drop”电子线路，
使该阀能够打开，并在打开之后将电流减小到保持功率。
与 DIN EN 17301-803 A 型电缆插头配套，该阀的安全防护等级为 IP65，不锈钢阀体式 NEMA 4X。
直动式介质隔离电磁阀，通径 DN 12
? Pressure range up to 100 bar
Circuit function A Servo-assisted 2/2-way valve, direct acting, normally closed.
Technical data Body material Brass with stainless steel seat 1.4581 Stainless steel body and stainless steel seat
 1.4581 Metal bellows Stainless steel 1.4541 Seal material PTFE Medium Neutral gases and liquids Medium temperature -200 to +180 °C
 Ambient temperature Max. +50 °C Viscosity Approx 21 mm2/s Operating voltages 24/110 VUC 220-230 VUC Voltage tolerance Max.
±10% Cycling rate 10/min Power consumption Kick and Drop electronic  72/4 W Duty cycle Continuous operation 100% ED Electrical
 connection Cable plug for ? 7 mm cable (included in delivery) Protection class IP65 with cable plug Installation position As required,
 preferably with actuator upright Weight 1.1 kg
Type 0255 can be combined with...
? Seat valve, direct-acting
steam, fuels, hydraulic materials, alcohol, organic solvents, waste gas
Media temperature FKM PTFE Steel
-10 to +130 °C -40 to +180 °C Up to + 250 °C (on request) Viscosity Max. 21 mm2/s Ambient temperature Max.
 + 55°C (250 °C on request), please see ordering chart Voltage tolerance ± 10% Duty cycle
100% continuous rating Electrical connection Cable plug for ? 7 mm cable, acc. to DIN EN 175301-803 Form A
? Media temperature up to 250 °C
? Push-over solenoid system
直动式升降式衔铁电磁阀也适合*压和*温。
重叠的线圈系统
紧凑型结构形式
2/2-way Solenoid Valve for high pressures and temperatures
The direct-acting plunger solenoid valve Type 0255 is also suitable for high pressures and high temperatures.
Type 2508 Cable plug

**供应宝得直动式二位二通升降式衔铁阀