上海乾拓供应原装力士乐电磁阀
如果您对该产品感兴趣的话,可以
产品名称: 上海乾拓供应原装力士乐电磁阀
产品型号: 4WRE6E1-32-2X/G24K4/V
产品展商: REXROTH
产品文档: 无相关文档
简单介绍
上海乾拓供应原装力士乐电磁阀
R900937065 4WREE6W1-16-2X/G24K31/F1V
R900936357 4WREE6V04-2X/G24K31/A1V
R900935426 4WREE6V1-08-2X/G24K31/A1V
R900934746 4WRE10W3-32-1X/24K4/M
R900934607 4WRE10E3-64-1X/24K4/M
R900934365 4WRE10E32-1X/24K4/V
比例方向阀4WRE6E1-32-2X/G24K4/V(带灯插头，带位置反馈GP45Z/4
上海乾拓供应原装力士乐电磁阀
上海乾拓供应原装力士乐电磁阀
的详细介绍
上海乾拓供应原装力士乐电磁阀
比例方向阀4WRE6E1-32-2X/G24K4/V(带灯插头，带位置反馈GP45Z/4
带电子位置反馈的直动式比例方向阀和外部电子元件
流动方向和大小的控制
通过带有中心螺纹和可拆卸线圈的比例电磁阀进行操作
用于底板安装：符合ISO 4401的移动模式
弹簧为中心的控制阀芯
类型4WRE ...- 2X / ...
4/2和4/3比例方向阀设计为板式设计的直接操作装置。 通过带有中心螺纹和可拆卸线圈的比例电磁阀进行操作。 电磁铁由外部电子设备控制
Set-up:
The valve basically consists of:
Housing (1) with connection surface
‐
Control spool (2) with compression springs (3 and 4) and spring plates (5 and 6)
‐
Solenoids (7 and 8) with central thread
‐
Position transducer (9)
‐
Function:
With de-energized solenoids (7 and 8), central position of the control spool (2) due to compression springs (3 and 4) between the spring plates (5 and 6)
‐
Direct actuation of the control spool (2) by the control of one proportional solenoid, e. g. solenoid "b" (8)
‐
Control spool (2) is moved to the left in proportion to the electrical input signal
?
Connection from P to A and B to T via orifice-type cross-sections with progressive
?
Switching off of the solenoid (8)
‐
Control spool (2) is returned to the central position by the compression spring (3)
?
In the de-energized state, the control spool (2) is held in a mechanical central position by the return spring of the solenoids. With control spool symbol "V", this position does not correspond to the hydraulic central position! When the electric valve control loop is closed, the control spool is positioned in the hydraulic central position.
Important notice:
The PG fitting (11) must not be opened. Mechanical adjustment of the adjustment nut located below is prohibited and damages the valve!
Valve with two spool positions: (Type 4WRE…A...)
The function of this valve version basically corresponds to the valve with three spool positions. The 2 spool position valve is, however, only equipped with solenoid “a” (7). Instead of the 2nd proportional solenoid, a plug screw (10) is installed.
Notice:
Due to the design principle, internal leakage which may increase over the life cycle is inherent to the valves.
Notice:
The tank line must not be allowed to run empty. With corresponding installation conditions, a preload valve (preload pressure approx. 2 bar) must be installed.
上海乾拓供应原装力士乐电磁阀
