SMC液压缸CDQSB12-10D-M9NV的技术指导
如果您对该产品感兴趣的话,可以
产品名称: SMC液压缸CDQSB12-10D-M9NV的技术指导
产品型号: CDQSB12-10D-M9NV
产品展商: SMC
产品文档: 无相关文档
简单介绍
SMC液压缸CDQSB12-10D-M9NV的技术指导
JISB1176, strength class 10.9 or higher) for cylinder mounting.
(?20: 2 pcs.; ?32 to ?100: 4 pcs.) 2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
(JISB1176, strength class 10.9 or higher) for cylinder mounting. (
SMC液压缸CDQSB12-10D-M9NV的
SMC液压缸CDQSB12-10D-M9NV的技术指导
的详细介绍
SMC液压缸CDQSB12-10D-M9NV的技术指导
(JISB1176, strength class 10.9 or higher) for cylinder mounting.
(?20: 2 pcs.; ?32 to ?100: 4 pcs.)
2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
3. Make sure that the interlocking length of the rod end thread (male or female thread)
and the mounting material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time,
be sure to release the air inside the cylinder and the piping. When the air release is complete,
operate the cylinder at reduced pressure,
then gradually increase it to the normal operating pressure.
5. Since Series CHQB does not have an air release plug, release air from other components (e.g. from piping, etc.) as well.
6. When mounting the cylinder body with mounting bolts, use the tightening torques in the table at right as a guide
(JISB1176, strength class 10.9 or higher) for cylinder mounting.
(?20: 2 pcs.; ?32 to ?100: 4 pcs.) 2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
(JISB1176, strength class 10.9 or higher) for cylinder mounting. (?20: 2 pcs.; ?32 to ?100: 4 pcs.)
2. Since a lateral load (eccentric load) cannot be applied to the piston rod,
build the mounting jig in such a way that a lateral load will not be applied to the piston rod.
3. Make sure that the interlocking length of the rod end thread (male or female thread) and the mounting material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time,
be sure to release the air inside the cylinder and the piping. When the air release is complete, operate the cylinder at reduced pressure,
then gradually increase it to the normal operating pressure. 5. Since Series CHQB does not have an air release plug,
release air from other components (e.g. from piping, etc.) as well. 6. When mounting the cylinder body with mounting bolts,
use the tightening torques in the table at right as a guide
3. Make sure that the interlocking length of the rod end thread (male or female thread)
and the mounting material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time, be sure to release the air inside the cylinder and the piping。
When the air release is complete, operate the cylinder at reduced pressure,
then gradually increase it to the normal operating pressure.
5. Since Series CHQB does not have an air release plug,
release air from other components (e.g. from piping, etc.) as well.
6. When mounting the cylinder body with mounting bolts,
use the tightening torques in the table at right as a guide
SMC液压缸CDQSB12-10D-M9NV的技术指导 手机：17321017802（微信）
邮箱：17321017802@163.com
电话：021-39529829
传真：021-39529831-8007
联系人：
公司：上海乾拓贸易有限公司
