原装SMC回转驱动型2爪型气爪
如果您对该产品感兴趣的话,可以
产品名称: 原装SMC回转驱动型2爪型气爪
产品型号: MDBB63-50Z
产品展商: SMC
产品文档: 无相关文档
简单介绍
原装SMC回转驱动型2爪型气爪
内燃机缸体上安放活塞的空腔。是活塞运动的轨道，燃气在其中燃烧及膨胀，通过气缸壁还能散去一部分燃气传给的爆发余热，使发动机保持正常的工作温度。气缸的型式有整体式和单铸式。单铸式又分为干式和湿式两种。
原装SMC回转驱动型2爪型气爪
的详细介绍
原装SMC回转驱动型2爪型气爪
内置磁环 D 内置磁环
安装方式 B 基本型
缸径 63 缸径 63mm
通口螺纹的种类 - Rc
气缸行程 50 气缸行程 50mm
气缸追记号 - 无防护套,气缓冲
行程调整标记 - 无
双行程标记 - 行程标记
气缸行程2 - 无气缸行程2
气缸追记号2 - 无防护套,气缓冲
附件1 - 无
附件2 - 无
磁性开关型号 - 无磁性开关
磁性开关个数 - 2个 或 无
? Indication of effective gripping force
The effective gripping force shown in the
graphs to the right is expressed as F, which is
Gripping Force” for details of Gripping force at each
gripping point. Value of effective
gripping force is measured at the middle of
opening/closing stroke.
Note 2) ( ) Value shows MDHR mass,
but it does not include auto switch mass.
the thrust of one finger, when both fingers and
attachments are in full contact with the
workpiece as shown in the figure below.
When the finger opening/closing speed is
set as the total stroke of 0.2 seconds
or more, it may cause the
product to stick or completely stop its movement.
? Workpiece gripping point should be within the
gripping point range: The range shown for
each operating pressure given in the graphs tothe right.
? When the gripping point distance becomes
large, the finger attachment applies an
excessively large load to the finger sliding
section, causing excessive play of the fingers
and possibly leading to premature failure.
Note 1) Refer to page 494 “Effective
原装SMC回转驱动型2爪型气爪
